Model-H6 28mm Cylinder Portable Car Tire Inflator Air Compressor Pump

MAIN FEATURES

4X FASTEST TIRE INFLATOR & MAX 150PSI

• With a 120W high-speed motor and 28mm large diameter single cylinder, it can provide a maximum pressure of 150psi and an airflow rate of 40 L/min.
• Test Record：

1. 315/70 R17 pickup truck tire, is fully deflated, and it takes about 16 minutes to fill from 0 to 2.5BAR.
2. 215/55 R16 car tire, is fully deflated, and it takes about 4 minutes to go from 0 to 2.5BAR.

• Easy to operate and fast inflation speed, it is an excellent solution for road emergencies, and meeting various inflation needs.
• Portable tire inflators for pickup, cars, SUVs, motorcycles, bicycles, and sports balls.

2-WAY POWER SUPPLYING

• Built-in 7800mAh battery capacity. It meets the needs of emergency tire inflation when traveling and instant inflating of swimming pool and beach swimming gear.
• It comes with a DC-12V power cord and can be connected to a car cigarette lighter as a backup power supply.

AUTO SHUT OFF

• 4 Preset pumping modes: CAR, MOTORCYCLE, BICYCLE, BALL.
• Select the corresponding mode, and when the inflation pressure reaches the predetermined value, the machine will automatically pause. You can take a break to handle other work, which is completely safe.
• Note: The fifth custom mode is also retained. If you are familiar with air pressure values, you can set the target air pressure value you need according to your personal preferences.

POWER BANK

• The top USB-A output port can charge mobile phones or other electronic devices.

EASY TO USE

SPECIFICATIONS

• Voltage: ‎12 Volts (DC)
• Power Source: ‎Battery Powered
• Battery Cell Type: ‎3 Lithium Ion batteries
• Noise Level: ‎90 dB
• Maximum Power: 120W
• Maximum Pressure: ‎150 Pound per Square Inch
• Air Flow Capacity: 40 LPM

PACKAGE INCLUDED

• Auxbeam Car Tire Inflator* 1
• Type-C Charging Cable* 1
• Type-A Charging Cable* 1
• DC-12 cigarette Cable* 1
• Carry bag* 1
• User Manual* 1
• Extra Nozzles (Presta Valve* 1, Air Nozzle* 2, Ball Air Nozzle* 1),
• Air Hose* 1

FAQ

• How to use the LED Light?

BATTERY MAINTENANCE ATTENTION

• To ensure transportation safety, the lithium battery of new equipment is not configured in a fully charged state when it leaves the factory. Before using a new machine, please use the provided USB-C data cable to fully charge the machine before turning it on.
• The lithium battery will automatically discharge over time. If the machine is not used for a long time, it will feed the power, making it impossible to charge. Please charge the machine once every 3 months.